Does the order of glyphs matter in Stargate addresses?
Excepting the final glyph for point of origin, does the order of the glyphs matter when dialing a Stargate? I don't recall ever seeing someone dial an address out of order, or directly commenting on order mattering. Looking at the design of a DHD, it would seem like it doesn't matter, as there's no indicator on the DHD itself of the order of glyphs.
stargate
|
show 5 more comments
Excepting the final glyph for point of origin, does the order of the glyphs matter when dialing a Stargate? I don't recall ever seeing someone dial an address out of order, or directly commenting on order mattering. Looking at the design of a DHD, it would seem like it doesn't matter, as there's no indicator on the DHD itself of the order of glyphs.
stargate
7
To an alien looking at a rotary phone or, even better, a keypad, with no knowledge of Arabic numerals or the technical details of how a phone works, the order of symbol activation would appear to be arbitrary - but 555-4245 would get you a different person than 555-5424
– HorusKol
Jan 11 '12 at 23:17
How are these answers affected when you consider 8 or 9 symbol addresses, from later seasons & SGU?
– Adeptus
Jul 25 '16 at 7:03
@HorusKol: Not a good analogy, as neither a rotary phone nor a keypad give any feedback about the previously entered numbers. The DHD, however, highlights the symbols that have already been dialed, without indicating the order in which they have been dialed.
– O. R. Mapper
yesterday
@O.R.Mapper most keypad phones have had at least an LCD to provide feedback for at least 20 years now... but I think the analogy stands - you have a collection of symbols which "connect" if you complete an arbitrary symbol sequence. The only thing that seems to differ is the DHD requires an a specific origin symbol to complete the sequence. There's no guarantee that the same symbols in a different sequence (even with the same origin symbol at the end) will get you the same connections - in fact, it's practically guaranteed you won't with phones.
– HorusKol
yesterday
@HorusKol: "an LCD to provide feedback" - by showing the entered numbers in the order they were entered. Totally different case, thus. You press a key with a symbol on it, that symbol appears on the right of what is already shown in the LCD display. It's easy to see (also for an alien) that this is not arbitrary.
– O. R. Mapper
yesterday
|
show 5 more comments
Excepting the final glyph for point of origin, does the order of the glyphs matter when dialing a Stargate? I don't recall ever seeing someone dial an address out of order, or directly commenting on order mattering. Looking at the design of a DHD, it would seem like it doesn't matter, as there's no indicator on the DHD itself of the order of glyphs.
stargate
Excepting the final glyph for point of origin, does the order of the glyphs matter when dialing a Stargate? I don't recall ever seeing someone dial an address out of order, or directly commenting on order mattering. Looking at the design of a DHD, it would seem like it doesn't matter, as there's no indicator on the DHD itself of the order of glyphs.
stargate
stargate
asked Mar 14 '11 at 14:15
user1027
7
To an alien looking at a rotary phone or, even better, a keypad, with no knowledge of Arabic numerals or the technical details of how a phone works, the order of symbol activation would appear to be arbitrary - but 555-4245 would get you a different person than 555-5424
– HorusKol
Jan 11 '12 at 23:17
How are these answers affected when you consider 8 or 9 symbol addresses, from later seasons & SGU?
– Adeptus
Jul 25 '16 at 7:03
@HorusKol: Not a good analogy, as neither a rotary phone nor a keypad give any feedback about the previously entered numbers. The DHD, however, highlights the symbols that have already been dialed, without indicating the order in which they have been dialed.
– O. R. Mapper
yesterday
@O.R.Mapper most keypad phones have had at least an LCD to provide feedback for at least 20 years now... but I think the analogy stands - you have a collection of symbols which "connect" if you complete an arbitrary symbol sequence. The only thing that seems to differ is the DHD requires an a specific origin symbol to complete the sequence. There's no guarantee that the same symbols in a different sequence (even with the same origin symbol at the end) will get you the same connections - in fact, it's practically guaranteed you won't with phones.
– HorusKol
yesterday
@HorusKol: "an LCD to provide feedback" - by showing the entered numbers in the order they were entered. Totally different case, thus. You press a key with a symbol on it, that symbol appears on the right of what is already shown in the LCD display. It's easy to see (also for an alien) that this is not arbitrary.
– O. R. Mapper
yesterday
|
show 5 more comments
7
To an alien looking at a rotary phone or, even better, a keypad, with no knowledge of Arabic numerals or the technical details of how a phone works, the order of symbol activation would appear to be arbitrary - but 555-4245 would get you a different person than 555-5424
– HorusKol
Jan 11 '12 at 23:17
How are these answers affected when you consider 8 or 9 symbol addresses, from later seasons & SGU?
– Adeptus
Jul 25 '16 at 7:03
@HorusKol: Not a good analogy, as neither a rotary phone nor a keypad give any feedback about the previously entered numbers. The DHD, however, highlights the symbols that have already been dialed, without indicating the order in which they have been dialed.
– O. R. Mapper
yesterday
@O.R.Mapper most keypad phones have had at least an LCD to provide feedback for at least 20 years now... but I think the analogy stands - you have a collection of symbols which "connect" if you complete an arbitrary symbol sequence. The only thing that seems to differ is the DHD requires an a specific origin symbol to complete the sequence. There's no guarantee that the same symbols in a different sequence (even with the same origin symbol at the end) will get you the same connections - in fact, it's practically guaranteed you won't with phones.
– HorusKol
yesterday
@HorusKol: "an LCD to provide feedback" - by showing the entered numbers in the order they were entered. Totally different case, thus. You press a key with a symbol on it, that symbol appears on the right of what is already shown in the LCD display. It's easy to see (also for an alien) that this is not arbitrary.
– O. R. Mapper
yesterday
7
7
To an alien looking at a rotary phone or, even better, a keypad, with no knowledge of Arabic numerals or the technical details of how a phone works, the order of symbol activation would appear to be arbitrary - but 555-4245 would get you a different person than 555-5424
– HorusKol
Jan 11 '12 at 23:17
To an alien looking at a rotary phone or, even better, a keypad, with no knowledge of Arabic numerals or the technical details of how a phone works, the order of symbol activation would appear to be arbitrary - but 555-4245 would get you a different person than 555-5424
– HorusKol
Jan 11 '12 at 23:17
How are these answers affected when you consider 8 or 9 symbol addresses, from later seasons & SGU?
– Adeptus
Jul 25 '16 at 7:03
How are these answers affected when you consider 8 or 9 symbol addresses, from later seasons & SGU?
– Adeptus
Jul 25 '16 at 7:03
@HorusKol: Not a good analogy, as neither a rotary phone nor a keypad give any feedback about the previously entered numbers. The DHD, however, highlights the symbols that have already been dialed, without indicating the order in which they have been dialed.
– O. R. Mapper
yesterday
@HorusKol: Not a good analogy, as neither a rotary phone nor a keypad give any feedback about the previously entered numbers. The DHD, however, highlights the symbols that have already been dialed, without indicating the order in which they have been dialed.
– O. R. Mapper
yesterday
@O.R.Mapper most keypad phones have had at least an LCD to provide feedback for at least 20 years now... but I think the analogy stands - you have a collection of symbols which "connect" if you complete an arbitrary symbol sequence. The only thing that seems to differ is the DHD requires an a specific origin symbol to complete the sequence. There's no guarantee that the same symbols in a different sequence (even with the same origin symbol at the end) will get you the same connections - in fact, it's practically guaranteed you won't with phones.
– HorusKol
yesterday
@O.R.Mapper most keypad phones have had at least an LCD to provide feedback for at least 20 years now... but I think the analogy stands - you have a collection of symbols which "connect" if you complete an arbitrary symbol sequence. The only thing that seems to differ is the DHD requires an a specific origin symbol to complete the sequence. There's no guarantee that the same symbols in a different sequence (even with the same origin symbol at the end) will get you the same connections - in fact, it's practically guaranteed you won't with phones.
– HorusKol
yesterday
@HorusKol: "an LCD to provide feedback" - by showing the entered numbers in the order they were entered. Totally different case, thus. You press a key with a symbol on it, that symbol appears on the right of what is already shown in the LCD display. It's easy to see (also for an alien) that this is not arbitrary.
– O. R. Mapper
yesterday
@HorusKol: "an LCD to provide feedback" - by showing the entered numbers in the order they were entered. Totally different case, thus. You press a key with a symbol on it, that symbol appears on the right of what is already shown in the LCD display. It's easy to see (also for an alien) that this is not arbitrary.
– O. R. Mapper
yesterday
|
show 5 more comments
8 Answers
8
active
oldest
votes
Yes, the order does matter.
As pointed out in this answer, it appeared that at first glance, Chloe can't do math. The number of gates just appears to be far too few, she states that there is a 1 in 63 billion chance of randomly dialing a particular stargate. However, given 38 chevrons, and 7 random dials, that gives the number 38!/31!, or 63,606,090,240. Thus mathematically and given some random facts in episodes, the order must be important.
Note that the 39th one is unique to each site, and thus isn't included in the calculation.
Sorry for editing that linked answer, I wanted to remove the incorrect knock on Chloe's math skills.
– user1027
Mar 14 '11 at 18:01
LOL, no worries
– PearsonArtPhoto
Mar 14 '11 at 18:53
7
In support of your answer, I think there was an episode where they knew the six symbols, but didn't know the order, and said that it brought the number of addresses down to something manageable (720 if my math is right), although still not great since that many would still take a good amount of time.
– MBraedley
Mar 18 '11 at 2:57
2
@NickT - Of the 38 chevrons, 37 were identical across all Milky Way gates. The final one was unique to each gate, that's how they could easily tell which was the point of origin.
– Izkata
Nov 4 '11 at 23:34
1
But the why do we find earths symbol of origin on the gates?
– Daniel Steiner
Mar 8 '18 at 9:15
|
show 5 more comments
I have to disagree with Dima - the order of glyphs MUST matter.
My rationale is as follows:
We have often seen people having to rush to dial the gate. They've been taking fire, Jaffa/Wraith/Replicators closing in. The team has seconds left, and they're trying to dial as quickly as possible.
They dial a few glyphs, then frantically search, hit another glyph, and then quickly punch in 3 more (ending with the Point of Origin), hit the central crystal, and the gate opens. SG-1 is saved!
It's a scene we see literally dozens of times over the course of SG-1, and at least several times in the Atlantis episodes I've seen. It would make no sense for people to waste precious time looking for a particular symbol as the 3rd, or 4th, etc, if the order wasn't important.
So, while there's no logical reason, based on Daniel Jackson's original theory of addresses (6 points to define a 3D location, 7th for Point of Origin) for the order to matter, the character's repeated actions demonstrate that it is.
Edit:
Also, in the Atlantis pilot episode(s) "Rising", Ford memorizes the address the Wraith Darts dial, but he didn't memorize the order. Sheppard and McKay discuss this, and Sheppard explicitly points out that they need the order. McKay is initially dubious, but points out that knowing the symbols cuts down on the possible combinations.
There's a little humor in Sheppard having already done the math and being ready with the number (6! = 720).
1
Unless the reason they put them into a certain order is because that's the way they remember them. It's difficult enough to remember a sequence containing 7 items, much less remembering them without order.
– cledoux
Mar 14 '11 at 18:34
2
@karategeek6: Except that it doesn't work that way in the Atlantis pilot, where they have to test dial 720 addresses because they only have the 6 symbols, not the order.
– Jeff
Mar 28 '11 at 14:09
1
@Dima: I do not think that word means what you think it means. It would only be a plot hole if there were times different orders of the same symbols lead to the same planet, which is not the case.
– Jeff
Jan 12 '12 at 14:12
3
Why is there no reason for the order to not matter? It would certainly matter in cartesian coordinates if you switched from (x, y, z) to (z, y, x) without changing your interpretation of the inputs.
– Paul
Feb 24 '14 at 18:32
2
On Earth: 40,-73 is New York City, and -73,40 is near the middle of Antarctica. Order of points definitely matters for locations.
– Mooing Duck
Sep 4 '14 at 20:12
|
show 4 more comments
As far as I remember, the glyphs represent stars, which are endpoints of line segments. There are 3 pairs of glyphs, to represent 3 lines, whose intersection is your destination point. (Come to think of it, you only need an intersection of two lines to define a point, but whatever...).
So, in that case, the glyphs must be grouped into pairs to represent the lines, and the point of origin must be last. But the order of the pairs should not matter. I suppose that it is simply more convenient to memorize a sequence of 7 glyphs in a particular order, which is why they always dial them in order.
Edit:
I did not say the order did not matter at all. You cannot shuffle the glyphs randomly, but you can shuffle them somewhat.
Let's formalize this. Let's denote two glyphs defining a line segment as a_i and b_i, and let's denote the point of origin as o.
One way to specify a valid gate address would be
a1 b1 a2 b2 a3 b3 o
In this case, you should be able to swap corresponding a and b without changing the meaning, or you could swap (a_i b_i) and (a_j b_j) without changing the meaning.
Alternatively, you can use this convention:
a1 a2 a3 b1 b2 b3 o
Here again you should be able to swap corresponding a and b, or you can change the position of a pair. In other words,
a3 a2 a1 b3 b2 b1 o
should still be a valid address. This seems to correspond to @Jeff's observation.
Of course, you can come up with other conventions, but these two make the most sense to me.
1
3-space points are defined by the intersection of three planes; two lines only works for surfaces.
– Joseph Weissman
Mar 15 '11 at 1:05
@Joe: not true. Two straight lines in 3D space still intersect in only one point, or they do not intersect at all if they lie in parallel planes. 3 planes also intersect in 1 point. However, you 2 points do not define a plane, only a line. 3 points define a plane. So to define 3 planes you would need 9 points, not 6.
– Dima
Mar 15 '11 at 1:25
Also, you should be able to reverse points used to define a single line. So you could swap a1 and b1, for example. It's still the same line. However, I don't recall the SG crew ever knowing the notation convention, so they don't have the liberty of swapping symbols around.
– Scivitri
Mar 15 '11 at 19:38
@Scivitri: I know. I wrote that you can swap corresponding a's and b's. I just didn't write it out as an example.
– Dima
Mar 15 '11 at 20:20
@Dima: A single line in 3d space is on an infinite number of planes. The odds of two randomly selected lines in 3d space touching is effectively 0%. You need a line and a point to determine a plane. A plane and an intersecting line can determine a point, but this combination only requires five glyphs, not six
– Mooing Duck
Sep 4 '14 at 20:18
|
show 1 more comment
They have to be in order according to the rules of the show, but it's one of the many bits of Stargate canon that makes little sense. As previously answered, the points should be reversible, and only 4 of them would be necessary to calculate a point.
It should be noted, however, that calculating any specific position within an area of space using only 38 points within the area isn't possible, only the 63 billion mentioned. Sure, that sounds like a lot, but compared to the number of possible positions a gate could be in an area the size of our galaxy, it's ineffective. Adding in the stellar drift, the address system should not be adequate as described.
(Though since the gate can identify one end by point of origin and needs the 6-symbol coordinates for the other, and also given the correlative update system mentioned in some of the episodes, it would seem the gates all know each other's positions anyway, and the address is little more than a simplified way to enter the destination (basically the naming system mentioned near the end of season 7.) I suppose it could be seen as a password system, as well. Of course, given that they calculate planet locations with the gate addresses in some episodes, the science/simple logic comes into play anyway. Just one of the heap of plot holes in the franchise (and one of the many they've made fun of themselves for, if I remember correctly.)
add a comment |
The spoken word version of the planet with the ZPM was Pac La Rush Ta On As At (Paclarush Taonas also means "Lost in Fire" in Ancient.)
Welcome to this website, that's a very good first contribution! Would it not be rather "Ploc La Rush Ta On As At", judging from the name of the planet? stargate.wikia.com/wiki/Proclarush
– Eureka
Feb 24 '14 at 8:39
That's a very good contribution, but considering this is a two year old question with an accepted answer, it would be better as a comment.
– James Sheridan
Feb 24 '14 at 9:46
add a comment |
Also, the symbols can be spoken, remember. I recall that hell planet with the zpm that SG1 needed to power the chair on earth, that they didn't know was there, my episode knowledge is shaky. :)
2
I believe that was Proclarush.
– user1027
Apr 26 '11 at 20:39
add a comment |
What if the logic given in the show was erroneous?
My thoughts were that you make a line from coordinate 1 to coordinate 2. From the midpoint of 1-2, you make a line to 3, from the midpoint of that line, you make one to 4 and so on until you make a line from the point of origin to the midpoint of line x to point 6, 7 or 8. Order would count in such a system.
Or maybe Stargate coordinates are little-endian, so the gate will not activate until a full address input and has the point of origin as a parity. So the point of origin is the first point linked to another chevron's coordinate even though it is input last. Then the order of coordinates would be 100% hard-coded and no coordinate could be swapped to yield the same point in space.
Or the coordinates might be based on triangles, e.g. Triangle abc, Triangle def and point o or line go or triangle gho. Triangle abc yields a unique point by having a line between a and midpoint bc, and the midpoint of that line is connected to point b. This point is unique for each permutation of points a,b and c for Triangle abc, ergo coordinate triplet acb will not give the same point as triplet abc. The same rules apply for Triangle def. The midpoint of point abc and point def is x. The midpoint of x and o (the point of origin) is the final destination for a 7 chevron address. The midpoint of x and g is point y. The midpoint of y and o is the destination for an 8 chevron address. The Triangle xgo is used for a 9 chevron address.
Mind you all, my Stargate theory is convoluted, but it does offer an explanation for why gate addresses require a specific order of coordinates instead of just a specific set of them in any order or a specific set of pairs in any order. But in the math of the show's Stargate Theory, The pairs can be swapped and offer the same point. e.g. go forward 3 and up 2 is the same as go up 2 and go forward 3.
This directly conflicts with what we saw on-screen on numerous occasions.
– Valorum
Sep 29 '15 at 20:05
add a comment |
I think about this and I think I have a answer. There are two things you have to consider:
First, the way it is explained (3 lines + one point in space) is an easier explanation of a complex problem. That means that while it is a good explanation, it is not the complete explanation.
Second, you assume that one symbol is equal with one point, or one star. It could be an area, a representation for an mathematical equation, the Stargate would know the place even if you bombed complete system out off space.
A nearer explanation:
Let's start with the last symbol: How does the gate know where it (the gate) or the symbol is? But what of the gates which get moved from planet to planet? If one symbol would represent one planet (point in space) then a two symbol address would be enough. But than the gate would have had to have a lot more symbols. So there is a different system.
It is more logical that that one symbol is programmed with under symbols/sub symbols. For example, a 7 symbol address would be an 6+1 address where the 1 would be another 6, just shortened: 6+6 address.
The original gate (Antarctic) has a different last symbol than the second (symbiot/Egypt) gate. The second gate has the "at" â symbol which is a star on its own.
So the last symbol of a gate address are 6 symbols shortened into one symbol.
The idea with pairs. That doesn't matter. If you have 3 lines and know they just meet at one point, than neither pair nor order matter because there is only one possible 'meet' if the points (dots) are connected differently than the lines won't meet. A Stargate would be smart enough to filter that out. But it is not that easy.
So let's look at different galaxies. The same symbol could represent either a "star" or a galaxy. For example, if the symbol % is at first place it's the galaxy programmed on that symbol; if it's at second place it doesn't function; if it's on 3rd place it's planet a in that system right side/left side etc. The different galaxies+ many gates in the milky way+ the possibility of "there has to be more space for places we don't know yet, there is just enough space on the gate, if it is programmed in the way that that the order matters!
Normal Computers, how do they know that that button is the letter A or a or b or buttons which have 3 to 5 functions. It is a question of programming. It could be programmed that a point in place just has one combination even if an different order would be "free" (without a Stargate). (Or that some addresses can be mixed but others can't, which I doubt. It would be more effective to do the solo address thing). The Ancient thought they are the best(or only persons) and didn't programme for fast dialling. I want to add that the ones who "built" the Stargates (one persons invented it) are not the same persons who for example later returned to earth or fought the wraith) the real gatebuilders were smarter than they later generations.
The original gates (Milky Way) are built to have many (perhaps with possibility to grow) gates addresses. That's is why there are either 9 points on the gate (or just so the gate is symmetric which is very likely). So there is way for more addresses. The Stargate Universe series is not in my Stargate world because it is idiotic and not part of it. (P.S. Doesn't that ship not look like a Wraith ship? And that gate cant be the 1st generation, just look at the planes for the first gate which looks like the milky way's).
There's in addition of how a Stargate works. It functions in the opposite like a rubber band. For a rubber band 1 metre you need 2 steps. If you stretch the band, you need 5-6 steps. The gate functions the other way around, it pushes/shrinks space together and a suction from the place you want to go to (that's why the gate just functions in one direction by the way). While in canon there's talk about de- and rematerialization, that's not what really happens, just what the think. They once thought that the Ancients are from earth (and seeded other planets which is false too) which later gets seenn as false since they came from their own galaxy. Which I would have told you without the show. Bye the way, Atlantis left earth 5000 years ago and returned 1500-1000 years ago and not millions, most likely.
So in end effect, it is the programming and the "worms" that must somehow put it so that an order of the symbols is important (even if some addresses wouldn't need more that 2(or 5) mathematically.
New contributor
4
This is quite a long and difficult read, could you edit it to be clearer and add in evidence such as quotes where possible?
– TheLethalCarrot
yesterday
add a comment |
Your Answer
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "186"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: false,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: null,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
noCode: true, onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fscifi.stackexchange.com%2fquestions%2f2432%2fdoes-the-order-of-glyphs-matter-in-stargate-addresses%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
8 Answers
8
active
oldest
votes
8 Answers
8
active
oldest
votes
active
oldest
votes
active
oldest
votes
Yes, the order does matter.
As pointed out in this answer, it appeared that at first glance, Chloe can't do math. The number of gates just appears to be far too few, she states that there is a 1 in 63 billion chance of randomly dialing a particular stargate. However, given 38 chevrons, and 7 random dials, that gives the number 38!/31!, or 63,606,090,240. Thus mathematically and given some random facts in episodes, the order must be important.
Note that the 39th one is unique to each site, and thus isn't included in the calculation.
Sorry for editing that linked answer, I wanted to remove the incorrect knock on Chloe's math skills.
– user1027
Mar 14 '11 at 18:01
LOL, no worries
– PearsonArtPhoto
Mar 14 '11 at 18:53
7
In support of your answer, I think there was an episode where they knew the six symbols, but didn't know the order, and said that it brought the number of addresses down to something manageable (720 if my math is right), although still not great since that many would still take a good amount of time.
– MBraedley
Mar 18 '11 at 2:57
2
@NickT - Of the 38 chevrons, 37 were identical across all Milky Way gates. The final one was unique to each gate, that's how they could easily tell which was the point of origin.
– Izkata
Nov 4 '11 at 23:34
1
But the why do we find earths symbol of origin on the gates?
– Daniel Steiner
Mar 8 '18 at 9:15
|
show 5 more comments
Yes, the order does matter.
As pointed out in this answer, it appeared that at first glance, Chloe can't do math. The number of gates just appears to be far too few, she states that there is a 1 in 63 billion chance of randomly dialing a particular stargate. However, given 38 chevrons, and 7 random dials, that gives the number 38!/31!, or 63,606,090,240. Thus mathematically and given some random facts in episodes, the order must be important.
Note that the 39th one is unique to each site, and thus isn't included in the calculation.
Sorry for editing that linked answer, I wanted to remove the incorrect knock on Chloe's math skills.
– user1027
Mar 14 '11 at 18:01
LOL, no worries
– PearsonArtPhoto
Mar 14 '11 at 18:53
7
In support of your answer, I think there was an episode where they knew the six symbols, but didn't know the order, and said that it brought the number of addresses down to something manageable (720 if my math is right), although still not great since that many would still take a good amount of time.
– MBraedley
Mar 18 '11 at 2:57
2
@NickT - Of the 38 chevrons, 37 were identical across all Milky Way gates. The final one was unique to each gate, that's how they could easily tell which was the point of origin.
– Izkata
Nov 4 '11 at 23:34
1
But the why do we find earths symbol of origin on the gates?
– Daniel Steiner
Mar 8 '18 at 9:15
|
show 5 more comments
Yes, the order does matter.
As pointed out in this answer, it appeared that at first glance, Chloe can't do math. The number of gates just appears to be far too few, she states that there is a 1 in 63 billion chance of randomly dialing a particular stargate. However, given 38 chevrons, and 7 random dials, that gives the number 38!/31!, or 63,606,090,240. Thus mathematically and given some random facts in episodes, the order must be important.
Note that the 39th one is unique to each site, and thus isn't included in the calculation.
Yes, the order does matter.
As pointed out in this answer, it appeared that at first glance, Chloe can't do math. The number of gates just appears to be far too few, she states that there is a 1 in 63 billion chance of randomly dialing a particular stargate. However, given 38 chevrons, and 7 random dials, that gives the number 38!/31!, or 63,606,090,240. Thus mathematically and given some random facts in episodes, the order must be important.
Note that the 39th one is unique to each site, and thus isn't included in the calculation.
edited Apr 13 '17 at 12:43
Community♦
1
1
answered Mar 14 '11 at 17:50
PearsonArtPhotoPearsonArtPhoto
36.6k32177272
36.6k32177272
Sorry for editing that linked answer, I wanted to remove the incorrect knock on Chloe's math skills.
– user1027
Mar 14 '11 at 18:01
LOL, no worries
– PearsonArtPhoto
Mar 14 '11 at 18:53
7
In support of your answer, I think there was an episode where they knew the six symbols, but didn't know the order, and said that it brought the number of addresses down to something manageable (720 if my math is right), although still not great since that many would still take a good amount of time.
– MBraedley
Mar 18 '11 at 2:57
2
@NickT - Of the 38 chevrons, 37 were identical across all Milky Way gates. The final one was unique to each gate, that's how they could easily tell which was the point of origin.
– Izkata
Nov 4 '11 at 23:34
1
But the why do we find earths symbol of origin on the gates?
– Daniel Steiner
Mar 8 '18 at 9:15
|
show 5 more comments
Sorry for editing that linked answer, I wanted to remove the incorrect knock on Chloe's math skills.
– user1027
Mar 14 '11 at 18:01
LOL, no worries
– PearsonArtPhoto
Mar 14 '11 at 18:53
7
In support of your answer, I think there was an episode where they knew the six symbols, but didn't know the order, and said that it brought the number of addresses down to something manageable (720 if my math is right), although still not great since that many would still take a good amount of time.
– MBraedley
Mar 18 '11 at 2:57
2
@NickT - Of the 38 chevrons, 37 were identical across all Milky Way gates. The final one was unique to each gate, that's how they could easily tell which was the point of origin.
– Izkata
Nov 4 '11 at 23:34
1
But the why do we find earths symbol of origin on the gates?
– Daniel Steiner
Mar 8 '18 at 9:15
Sorry for editing that linked answer, I wanted to remove the incorrect knock on Chloe's math skills.
– user1027
Mar 14 '11 at 18:01
Sorry for editing that linked answer, I wanted to remove the incorrect knock on Chloe's math skills.
– user1027
Mar 14 '11 at 18:01
LOL, no worries
– PearsonArtPhoto
Mar 14 '11 at 18:53
LOL, no worries
– PearsonArtPhoto
Mar 14 '11 at 18:53
7
7
In support of your answer, I think there was an episode where they knew the six symbols, but didn't know the order, and said that it brought the number of addresses down to something manageable (720 if my math is right), although still not great since that many would still take a good amount of time.
– MBraedley
Mar 18 '11 at 2:57
In support of your answer, I think there was an episode where they knew the six symbols, but didn't know the order, and said that it brought the number of addresses down to something manageable (720 if my math is right), although still not great since that many would still take a good amount of time.
– MBraedley
Mar 18 '11 at 2:57
2
2
@NickT - Of the 38 chevrons, 37 were identical across all Milky Way gates. The final one was unique to each gate, that's how they could easily tell which was the point of origin.
– Izkata
Nov 4 '11 at 23:34
@NickT - Of the 38 chevrons, 37 were identical across all Milky Way gates. The final one was unique to each gate, that's how they could easily tell which was the point of origin.
– Izkata
Nov 4 '11 at 23:34
1
1
But the why do we find earths symbol of origin on the gates?
– Daniel Steiner
Mar 8 '18 at 9:15
But the why do we find earths symbol of origin on the gates?
– Daniel Steiner
Mar 8 '18 at 9:15
|
show 5 more comments
I have to disagree with Dima - the order of glyphs MUST matter.
My rationale is as follows:
We have often seen people having to rush to dial the gate. They've been taking fire, Jaffa/Wraith/Replicators closing in. The team has seconds left, and they're trying to dial as quickly as possible.
They dial a few glyphs, then frantically search, hit another glyph, and then quickly punch in 3 more (ending with the Point of Origin), hit the central crystal, and the gate opens. SG-1 is saved!
It's a scene we see literally dozens of times over the course of SG-1, and at least several times in the Atlantis episodes I've seen. It would make no sense for people to waste precious time looking for a particular symbol as the 3rd, or 4th, etc, if the order wasn't important.
So, while there's no logical reason, based on Daniel Jackson's original theory of addresses (6 points to define a 3D location, 7th for Point of Origin) for the order to matter, the character's repeated actions demonstrate that it is.
Edit:
Also, in the Atlantis pilot episode(s) "Rising", Ford memorizes the address the Wraith Darts dial, but he didn't memorize the order. Sheppard and McKay discuss this, and Sheppard explicitly points out that they need the order. McKay is initially dubious, but points out that knowing the symbols cuts down on the possible combinations.
There's a little humor in Sheppard having already done the math and being ready with the number (6! = 720).
1
Unless the reason they put them into a certain order is because that's the way they remember them. It's difficult enough to remember a sequence containing 7 items, much less remembering them without order.
– cledoux
Mar 14 '11 at 18:34
2
@karategeek6: Except that it doesn't work that way in the Atlantis pilot, where they have to test dial 720 addresses because they only have the 6 symbols, not the order.
– Jeff
Mar 28 '11 at 14:09
1
@Dima: I do not think that word means what you think it means. It would only be a plot hole if there were times different orders of the same symbols lead to the same planet, which is not the case.
– Jeff
Jan 12 '12 at 14:12
3
Why is there no reason for the order to not matter? It would certainly matter in cartesian coordinates if you switched from (x, y, z) to (z, y, x) without changing your interpretation of the inputs.
– Paul
Feb 24 '14 at 18:32
2
On Earth: 40,-73 is New York City, and -73,40 is near the middle of Antarctica. Order of points definitely matters for locations.
– Mooing Duck
Sep 4 '14 at 20:12
|
show 4 more comments
I have to disagree with Dima - the order of glyphs MUST matter.
My rationale is as follows:
We have often seen people having to rush to dial the gate. They've been taking fire, Jaffa/Wraith/Replicators closing in. The team has seconds left, and they're trying to dial as quickly as possible.
They dial a few glyphs, then frantically search, hit another glyph, and then quickly punch in 3 more (ending with the Point of Origin), hit the central crystal, and the gate opens. SG-1 is saved!
It's a scene we see literally dozens of times over the course of SG-1, and at least several times in the Atlantis episodes I've seen. It would make no sense for people to waste precious time looking for a particular symbol as the 3rd, or 4th, etc, if the order wasn't important.
So, while there's no logical reason, based on Daniel Jackson's original theory of addresses (6 points to define a 3D location, 7th for Point of Origin) for the order to matter, the character's repeated actions demonstrate that it is.
Edit:
Also, in the Atlantis pilot episode(s) "Rising", Ford memorizes the address the Wraith Darts dial, but he didn't memorize the order. Sheppard and McKay discuss this, and Sheppard explicitly points out that they need the order. McKay is initially dubious, but points out that knowing the symbols cuts down on the possible combinations.
There's a little humor in Sheppard having already done the math and being ready with the number (6! = 720).
1
Unless the reason they put them into a certain order is because that's the way they remember them. It's difficult enough to remember a sequence containing 7 items, much less remembering them without order.
– cledoux
Mar 14 '11 at 18:34
2
@karategeek6: Except that it doesn't work that way in the Atlantis pilot, where they have to test dial 720 addresses because they only have the 6 symbols, not the order.
– Jeff
Mar 28 '11 at 14:09
1
@Dima: I do not think that word means what you think it means. It would only be a plot hole if there were times different orders of the same symbols lead to the same planet, which is not the case.
– Jeff
Jan 12 '12 at 14:12
3
Why is there no reason for the order to not matter? It would certainly matter in cartesian coordinates if you switched from (x, y, z) to (z, y, x) without changing your interpretation of the inputs.
– Paul
Feb 24 '14 at 18:32
2
On Earth: 40,-73 is New York City, and -73,40 is near the middle of Antarctica. Order of points definitely matters for locations.
– Mooing Duck
Sep 4 '14 at 20:12
|
show 4 more comments
I have to disagree with Dima - the order of glyphs MUST matter.
My rationale is as follows:
We have often seen people having to rush to dial the gate. They've been taking fire, Jaffa/Wraith/Replicators closing in. The team has seconds left, and they're trying to dial as quickly as possible.
They dial a few glyphs, then frantically search, hit another glyph, and then quickly punch in 3 more (ending with the Point of Origin), hit the central crystal, and the gate opens. SG-1 is saved!
It's a scene we see literally dozens of times over the course of SG-1, and at least several times in the Atlantis episodes I've seen. It would make no sense for people to waste precious time looking for a particular symbol as the 3rd, or 4th, etc, if the order wasn't important.
So, while there's no logical reason, based on Daniel Jackson's original theory of addresses (6 points to define a 3D location, 7th for Point of Origin) for the order to matter, the character's repeated actions demonstrate that it is.
Edit:
Also, in the Atlantis pilot episode(s) "Rising", Ford memorizes the address the Wraith Darts dial, but he didn't memorize the order. Sheppard and McKay discuss this, and Sheppard explicitly points out that they need the order. McKay is initially dubious, but points out that knowing the symbols cuts down on the possible combinations.
There's a little humor in Sheppard having already done the math and being ready with the number (6! = 720).
I have to disagree with Dima - the order of glyphs MUST matter.
My rationale is as follows:
We have often seen people having to rush to dial the gate. They've been taking fire, Jaffa/Wraith/Replicators closing in. The team has seconds left, and they're trying to dial as quickly as possible.
They dial a few glyphs, then frantically search, hit another glyph, and then quickly punch in 3 more (ending with the Point of Origin), hit the central crystal, and the gate opens. SG-1 is saved!
It's a scene we see literally dozens of times over the course of SG-1, and at least several times in the Atlantis episodes I've seen. It would make no sense for people to waste precious time looking for a particular symbol as the 3rd, or 4th, etc, if the order wasn't important.
So, while there's no logical reason, based on Daniel Jackson's original theory of addresses (6 points to define a 3D location, 7th for Point of Origin) for the order to matter, the character's repeated actions demonstrate that it is.
Edit:
Also, in the Atlantis pilot episode(s) "Rising", Ford memorizes the address the Wraith Darts dial, but he didn't memorize the order. Sheppard and McKay discuss this, and Sheppard explicitly points out that they need the order. McKay is initially dubious, but points out that knowing the symbols cuts down on the possible combinations.
There's a little humor in Sheppard having already done the math and being ready with the number (6! = 720).
edited Mar 28 '11 at 14:08
answered Mar 14 '11 at 15:30
JeffJeff
93.6k27311390
93.6k27311390
1
Unless the reason they put them into a certain order is because that's the way they remember them. It's difficult enough to remember a sequence containing 7 items, much less remembering them without order.
– cledoux
Mar 14 '11 at 18:34
2
@karategeek6: Except that it doesn't work that way in the Atlantis pilot, where they have to test dial 720 addresses because they only have the 6 symbols, not the order.
– Jeff
Mar 28 '11 at 14:09
1
@Dima: I do not think that word means what you think it means. It would only be a plot hole if there were times different orders of the same symbols lead to the same planet, which is not the case.
– Jeff
Jan 12 '12 at 14:12
3
Why is there no reason for the order to not matter? It would certainly matter in cartesian coordinates if you switched from (x, y, z) to (z, y, x) without changing your interpretation of the inputs.
– Paul
Feb 24 '14 at 18:32
2
On Earth: 40,-73 is New York City, and -73,40 is near the middle of Antarctica. Order of points definitely matters for locations.
– Mooing Duck
Sep 4 '14 at 20:12
|
show 4 more comments
1
Unless the reason they put them into a certain order is because that's the way they remember them. It's difficult enough to remember a sequence containing 7 items, much less remembering them without order.
– cledoux
Mar 14 '11 at 18:34
2
@karategeek6: Except that it doesn't work that way in the Atlantis pilot, where they have to test dial 720 addresses because they only have the 6 symbols, not the order.
– Jeff
Mar 28 '11 at 14:09
1
@Dima: I do not think that word means what you think it means. It would only be a plot hole if there were times different orders of the same symbols lead to the same planet, which is not the case.
– Jeff
Jan 12 '12 at 14:12
3
Why is there no reason for the order to not matter? It would certainly matter in cartesian coordinates if you switched from (x, y, z) to (z, y, x) without changing your interpretation of the inputs.
– Paul
Feb 24 '14 at 18:32
2
On Earth: 40,-73 is New York City, and -73,40 is near the middle of Antarctica. Order of points definitely matters for locations.
– Mooing Duck
Sep 4 '14 at 20:12
1
1
Unless the reason they put them into a certain order is because that's the way they remember them. It's difficult enough to remember a sequence containing 7 items, much less remembering them without order.
– cledoux
Mar 14 '11 at 18:34
Unless the reason they put them into a certain order is because that's the way they remember them. It's difficult enough to remember a sequence containing 7 items, much less remembering them without order.
– cledoux
Mar 14 '11 at 18:34
2
2
@karategeek6: Except that it doesn't work that way in the Atlantis pilot, where they have to test dial 720 addresses because they only have the 6 symbols, not the order.
– Jeff
Mar 28 '11 at 14:09
@karategeek6: Except that it doesn't work that way in the Atlantis pilot, where they have to test dial 720 addresses because they only have the 6 symbols, not the order.
– Jeff
Mar 28 '11 at 14:09
1
1
@Dima: I do not think that word means what you think it means. It would only be a plot hole if there were times different orders of the same symbols lead to the same planet, which is not the case.
– Jeff
Jan 12 '12 at 14:12
@Dima: I do not think that word means what you think it means. It would only be a plot hole if there were times different orders of the same symbols lead to the same planet, which is not the case.
– Jeff
Jan 12 '12 at 14:12
3
3
Why is there no reason for the order to not matter? It would certainly matter in cartesian coordinates if you switched from (x, y, z) to (z, y, x) without changing your interpretation of the inputs.
– Paul
Feb 24 '14 at 18:32
Why is there no reason for the order to not matter? It would certainly matter in cartesian coordinates if you switched from (x, y, z) to (z, y, x) without changing your interpretation of the inputs.
– Paul
Feb 24 '14 at 18:32
2
2
On Earth: 40,-73 is New York City, and -73,40 is near the middle of Antarctica. Order of points definitely matters for locations.
– Mooing Duck
Sep 4 '14 at 20:12
On Earth: 40,-73 is New York City, and -73,40 is near the middle of Antarctica. Order of points definitely matters for locations.
– Mooing Duck
Sep 4 '14 at 20:12
|
show 4 more comments
As far as I remember, the glyphs represent stars, which are endpoints of line segments. There are 3 pairs of glyphs, to represent 3 lines, whose intersection is your destination point. (Come to think of it, you only need an intersection of two lines to define a point, but whatever...).
So, in that case, the glyphs must be grouped into pairs to represent the lines, and the point of origin must be last. But the order of the pairs should not matter. I suppose that it is simply more convenient to memorize a sequence of 7 glyphs in a particular order, which is why they always dial them in order.
Edit:
I did not say the order did not matter at all. You cannot shuffle the glyphs randomly, but you can shuffle them somewhat.
Let's formalize this. Let's denote two glyphs defining a line segment as a_i and b_i, and let's denote the point of origin as o.
One way to specify a valid gate address would be
a1 b1 a2 b2 a3 b3 o
In this case, you should be able to swap corresponding a and b without changing the meaning, or you could swap (a_i b_i) and (a_j b_j) without changing the meaning.
Alternatively, you can use this convention:
a1 a2 a3 b1 b2 b3 o
Here again you should be able to swap corresponding a and b, or you can change the position of a pair. In other words,
a3 a2 a1 b3 b2 b1 o
should still be a valid address. This seems to correspond to @Jeff's observation.
Of course, you can come up with other conventions, but these two make the most sense to me.
1
3-space points are defined by the intersection of three planes; two lines only works for surfaces.
– Joseph Weissman
Mar 15 '11 at 1:05
@Joe: not true. Two straight lines in 3D space still intersect in only one point, or they do not intersect at all if they lie in parallel planes. 3 planes also intersect in 1 point. However, you 2 points do not define a plane, only a line. 3 points define a plane. So to define 3 planes you would need 9 points, not 6.
– Dima
Mar 15 '11 at 1:25
Also, you should be able to reverse points used to define a single line. So you could swap a1 and b1, for example. It's still the same line. However, I don't recall the SG crew ever knowing the notation convention, so they don't have the liberty of swapping symbols around.
– Scivitri
Mar 15 '11 at 19:38
@Scivitri: I know. I wrote that you can swap corresponding a's and b's. I just didn't write it out as an example.
– Dima
Mar 15 '11 at 20:20
@Dima: A single line in 3d space is on an infinite number of planes. The odds of two randomly selected lines in 3d space touching is effectively 0%. You need a line and a point to determine a plane. A plane and an intersecting line can determine a point, but this combination only requires five glyphs, not six
– Mooing Duck
Sep 4 '14 at 20:18
|
show 1 more comment
As far as I remember, the glyphs represent stars, which are endpoints of line segments. There are 3 pairs of glyphs, to represent 3 lines, whose intersection is your destination point. (Come to think of it, you only need an intersection of two lines to define a point, but whatever...).
So, in that case, the glyphs must be grouped into pairs to represent the lines, and the point of origin must be last. But the order of the pairs should not matter. I suppose that it is simply more convenient to memorize a sequence of 7 glyphs in a particular order, which is why they always dial them in order.
Edit:
I did not say the order did not matter at all. You cannot shuffle the glyphs randomly, but you can shuffle them somewhat.
Let's formalize this. Let's denote two glyphs defining a line segment as a_i and b_i, and let's denote the point of origin as o.
One way to specify a valid gate address would be
a1 b1 a2 b2 a3 b3 o
In this case, you should be able to swap corresponding a and b without changing the meaning, or you could swap (a_i b_i) and (a_j b_j) without changing the meaning.
Alternatively, you can use this convention:
a1 a2 a3 b1 b2 b3 o
Here again you should be able to swap corresponding a and b, or you can change the position of a pair. In other words,
a3 a2 a1 b3 b2 b1 o
should still be a valid address. This seems to correspond to @Jeff's observation.
Of course, you can come up with other conventions, but these two make the most sense to me.
1
3-space points are defined by the intersection of three planes; two lines only works for surfaces.
– Joseph Weissman
Mar 15 '11 at 1:05
@Joe: not true. Two straight lines in 3D space still intersect in only one point, or they do not intersect at all if they lie in parallel planes. 3 planes also intersect in 1 point. However, you 2 points do not define a plane, only a line. 3 points define a plane. So to define 3 planes you would need 9 points, not 6.
– Dima
Mar 15 '11 at 1:25
Also, you should be able to reverse points used to define a single line. So you could swap a1 and b1, for example. It's still the same line. However, I don't recall the SG crew ever knowing the notation convention, so they don't have the liberty of swapping symbols around.
– Scivitri
Mar 15 '11 at 19:38
@Scivitri: I know. I wrote that you can swap corresponding a's and b's. I just didn't write it out as an example.
– Dima
Mar 15 '11 at 20:20
@Dima: A single line in 3d space is on an infinite number of planes. The odds of two randomly selected lines in 3d space touching is effectively 0%. You need a line and a point to determine a plane. A plane and an intersecting line can determine a point, but this combination only requires five glyphs, not six
– Mooing Duck
Sep 4 '14 at 20:18
|
show 1 more comment
As far as I remember, the glyphs represent stars, which are endpoints of line segments. There are 3 pairs of glyphs, to represent 3 lines, whose intersection is your destination point. (Come to think of it, you only need an intersection of two lines to define a point, but whatever...).
So, in that case, the glyphs must be grouped into pairs to represent the lines, and the point of origin must be last. But the order of the pairs should not matter. I suppose that it is simply more convenient to memorize a sequence of 7 glyphs in a particular order, which is why they always dial them in order.
Edit:
I did not say the order did not matter at all. You cannot shuffle the glyphs randomly, but you can shuffle them somewhat.
Let's formalize this. Let's denote two glyphs defining a line segment as a_i and b_i, and let's denote the point of origin as o.
One way to specify a valid gate address would be
a1 b1 a2 b2 a3 b3 o
In this case, you should be able to swap corresponding a and b without changing the meaning, or you could swap (a_i b_i) and (a_j b_j) without changing the meaning.
Alternatively, you can use this convention:
a1 a2 a3 b1 b2 b3 o
Here again you should be able to swap corresponding a and b, or you can change the position of a pair. In other words,
a3 a2 a1 b3 b2 b1 o
should still be a valid address. This seems to correspond to @Jeff's observation.
Of course, you can come up with other conventions, but these two make the most sense to me.
As far as I remember, the glyphs represent stars, which are endpoints of line segments. There are 3 pairs of glyphs, to represent 3 lines, whose intersection is your destination point. (Come to think of it, you only need an intersection of two lines to define a point, but whatever...).
So, in that case, the glyphs must be grouped into pairs to represent the lines, and the point of origin must be last. But the order of the pairs should not matter. I suppose that it is simply more convenient to memorize a sequence of 7 glyphs in a particular order, which is why they always dial them in order.
Edit:
I did not say the order did not matter at all. You cannot shuffle the glyphs randomly, but you can shuffle them somewhat.
Let's formalize this. Let's denote two glyphs defining a line segment as a_i and b_i, and let's denote the point of origin as o.
One way to specify a valid gate address would be
a1 b1 a2 b2 a3 b3 o
In this case, you should be able to swap corresponding a and b without changing the meaning, or you could swap (a_i b_i) and (a_j b_j) without changing the meaning.
Alternatively, you can use this convention:
a1 a2 a3 b1 b2 b3 o
Here again you should be able to swap corresponding a and b, or you can change the position of a pair. In other words,
a3 a2 a1 b3 b2 b1 o
should still be a valid address. This seems to correspond to @Jeff's observation.
Of course, you can come up with other conventions, but these two make the most sense to me.
edited Mar 14 '11 at 16:16
answered Mar 14 '11 at 15:15
DimaDima
12.8k34365
12.8k34365
1
3-space points are defined by the intersection of three planes; two lines only works for surfaces.
– Joseph Weissman
Mar 15 '11 at 1:05
@Joe: not true. Two straight lines in 3D space still intersect in only one point, or they do not intersect at all if they lie in parallel planes. 3 planes also intersect in 1 point. However, you 2 points do not define a plane, only a line. 3 points define a plane. So to define 3 planes you would need 9 points, not 6.
– Dima
Mar 15 '11 at 1:25
Also, you should be able to reverse points used to define a single line. So you could swap a1 and b1, for example. It's still the same line. However, I don't recall the SG crew ever knowing the notation convention, so they don't have the liberty of swapping symbols around.
– Scivitri
Mar 15 '11 at 19:38
@Scivitri: I know. I wrote that you can swap corresponding a's and b's. I just didn't write it out as an example.
– Dima
Mar 15 '11 at 20:20
@Dima: A single line in 3d space is on an infinite number of planes. The odds of two randomly selected lines in 3d space touching is effectively 0%. You need a line and a point to determine a plane. A plane and an intersecting line can determine a point, but this combination only requires five glyphs, not six
– Mooing Duck
Sep 4 '14 at 20:18
|
show 1 more comment
1
3-space points are defined by the intersection of three planes; two lines only works for surfaces.
– Joseph Weissman
Mar 15 '11 at 1:05
@Joe: not true. Two straight lines in 3D space still intersect in only one point, or they do not intersect at all if they lie in parallel planes. 3 planes also intersect in 1 point. However, you 2 points do not define a plane, only a line. 3 points define a plane. So to define 3 planes you would need 9 points, not 6.
– Dima
Mar 15 '11 at 1:25
Also, you should be able to reverse points used to define a single line. So you could swap a1 and b1, for example. It's still the same line. However, I don't recall the SG crew ever knowing the notation convention, so they don't have the liberty of swapping symbols around.
– Scivitri
Mar 15 '11 at 19:38
@Scivitri: I know. I wrote that you can swap corresponding a's and b's. I just didn't write it out as an example.
– Dima
Mar 15 '11 at 20:20
@Dima: A single line in 3d space is on an infinite number of planes. The odds of two randomly selected lines in 3d space touching is effectively 0%. You need a line and a point to determine a plane. A plane and an intersecting line can determine a point, but this combination only requires five glyphs, not six
– Mooing Duck
Sep 4 '14 at 20:18
1
1
3-space points are defined by the intersection of three planes; two lines only works for surfaces.
– Joseph Weissman
Mar 15 '11 at 1:05
3-space points are defined by the intersection of three planes; two lines only works for surfaces.
– Joseph Weissman
Mar 15 '11 at 1:05
@Joe: not true. Two straight lines in 3D space still intersect in only one point, or they do not intersect at all if they lie in parallel planes. 3 planes also intersect in 1 point. However, you 2 points do not define a plane, only a line. 3 points define a plane. So to define 3 planes you would need 9 points, not 6.
– Dima
Mar 15 '11 at 1:25
@Joe: not true. Two straight lines in 3D space still intersect in only one point, or they do not intersect at all if they lie in parallel planes. 3 planes also intersect in 1 point. However, you 2 points do not define a plane, only a line. 3 points define a plane. So to define 3 planes you would need 9 points, not 6.
– Dima
Mar 15 '11 at 1:25
Also, you should be able to reverse points used to define a single line. So you could swap a1 and b1, for example. It's still the same line. However, I don't recall the SG crew ever knowing the notation convention, so they don't have the liberty of swapping symbols around.
– Scivitri
Mar 15 '11 at 19:38
Also, you should be able to reverse points used to define a single line. So you could swap a1 and b1, for example. It's still the same line. However, I don't recall the SG crew ever knowing the notation convention, so they don't have the liberty of swapping symbols around.
– Scivitri
Mar 15 '11 at 19:38
@Scivitri: I know. I wrote that you can swap corresponding a's and b's. I just didn't write it out as an example.
– Dima
Mar 15 '11 at 20:20
@Scivitri: I know. I wrote that you can swap corresponding a's and b's. I just didn't write it out as an example.
– Dima
Mar 15 '11 at 20:20
@Dima: A single line in 3d space is on an infinite number of planes. The odds of two randomly selected lines in 3d space touching is effectively 0%. You need a line and a point to determine a plane. A plane and an intersecting line can determine a point, but this combination only requires five glyphs, not six
– Mooing Duck
Sep 4 '14 at 20:18
@Dima: A single line in 3d space is on an infinite number of planes. The odds of two randomly selected lines in 3d space touching is effectively 0%. You need a line and a point to determine a plane. A plane and an intersecting line can determine a point, but this combination only requires five glyphs, not six
– Mooing Duck
Sep 4 '14 at 20:18
|
show 1 more comment
They have to be in order according to the rules of the show, but it's one of the many bits of Stargate canon that makes little sense. As previously answered, the points should be reversible, and only 4 of them would be necessary to calculate a point.
It should be noted, however, that calculating any specific position within an area of space using only 38 points within the area isn't possible, only the 63 billion mentioned. Sure, that sounds like a lot, but compared to the number of possible positions a gate could be in an area the size of our galaxy, it's ineffective. Adding in the stellar drift, the address system should not be adequate as described.
(Though since the gate can identify one end by point of origin and needs the 6-symbol coordinates for the other, and also given the correlative update system mentioned in some of the episodes, it would seem the gates all know each other's positions anyway, and the address is little more than a simplified way to enter the destination (basically the naming system mentioned near the end of season 7.) I suppose it could be seen as a password system, as well. Of course, given that they calculate planet locations with the gate addresses in some episodes, the science/simple logic comes into play anyway. Just one of the heap of plot holes in the franchise (and one of the many they've made fun of themselves for, if I remember correctly.)
add a comment |
They have to be in order according to the rules of the show, but it's one of the many bits of Stargate canon that makes little sense. As previously answered, the points should be reversible, and only 4 of them would be necessary to calculate a point.
It should be noted, however, that calculating any specific position within an area of space using only 38 points within the area isn't possible, only the 63 billion mentioned. Sure, that sounds like a lot, but compared to the number of possible positions a gate could be in an area the size of our galaxy, it's ineffective. Adding in the stellar drift, the address system should not be adequate as described.
(Though since the gate can identify one end by point of origin and needs the 6-symbol coordinates for the other, and also given the correlative update system mentioned in some of the episodes, it would seem the gates all know each other's positions anyway, and the address is little more than a simplified way to enter the destination (basically the naming system mentioned near the end of season 7.) I suppose it could be seen as a password system, as well. Of course, given that they calculate planet locations with the gate addresses in some episodes, the science/simple logic comes into play anyway. Just one of the heap of plot holes in the franchise (and one of the many they've made fun of themselves for, if I remember correctly.)
add a comment |
They have to be in order according to the rules of the show, but it's one of the many bits of Stargate canon that makes little sense. As previously answered, the points should be reversible, and only 4 of them would be necessary to calculate a point.
It should be noted, however, that calculating any specific position within an area of space using only 38 points within the area isn't possible, only the 63 billion mentioned. Sure, that sounds like a lot, but compared to the number of possible positions a gate could be in an area the size of our galaxy, it's ineffective. Adding in the stellar drift, the address system should not be adequate as described.
(Though since the gate can identify one end by point of origin and needs the 6-symbol coordinates for the other, and also given the correlative update system mentioned in some of the episodes, it would seem the gates all know each other's positions anyway, and the address is little more than a simplified way to enter the destination (basically the naming system mentioned near the end of season 7.) I suppose it could be seen as a password system, as well. Of course, given that they calculate planet locations with the gate addresses in some episodes, the science/simple logic comes into play anyway. Just one of the heap of plot holes in the franchise (and one of the many they've made fun of themselves for, if I remember correctly.)
They have to be in order according to the rules of the show, but it's one of the many bits of Stargate canon that makes little sense. As previously answered, the points should be reversible, and only 4 of them would be necessary to calculate a point.
It should be noted, however, that calculating any specific position within an area of space using only 38 points within the area isn't possible, only the 63 billion mentioned. Sure, that sounds like a lot, but compared to the number of possible positions a gate could be in an area the size of our galaxy, it's ineffective. Adding in the stellar drift, the address system should not be adequate as described.
(Though since the gate can identify one end by point of origin and needs the 6-symbol coordinates for the other, and also given the correlative update system mentioned in some of the episodes, it would seem the gates all know each other's positions anyway, and the address is little more than a simplified way to enter the destination (basically the naming system mentioned near the end of season 7.) I suppose it could be seen as a password system, as well. Of course, given that they calculate planet locations with the gate addresses in some episodes, the science/simple logic comes into play anyway. Just one of the heap of plot holes in the franchise (and one of the many they've made fun of themselves for, if I remember correctly.)
answered Oct 17 '13 at 18:41
Todd Le WraithTodd Le Wraith
311
311
add a comment |
add a comment |
The spoken word version of the planet with the ZPM was Pac La Rush Ta On As At (Paclarush Taonas also means "Lost in Fire" in Ancient.)
Welcome to this website, that's a very good first contribution! Would it not be rather "Ploc La Rush Ta On As At", judging from the name of the planet? stargate.wikia.com/wiki/Proclarush
– Eureka
Feb 24 '14 at 8:39
That's a very good contribution, but considering this is a two year old question with an accepted answer, it would be better as a comment.
– James Sheridan
Feb 24 '14 at 9:46
add a comment |
The spoken word version of the planet with the ZPM was Pac La Rush Ta On As At (Paclarush Taonas also means "Lost in Fire" in Ancient.)
Welcome to this website, that's a very good first contribution! Would it not be rather "Ploc La Rush Ta On As At", judging from the name of the planet? stargate.wikia.com/wiki/Proclarush
– Eureka
Feb 24 '14 at 8:39
That's a very good contribution, but considering this is a two year old question with an accepted answer, it would be better as a comment.
– James Sheridan
Feb 24 '14 at 9:46
add a comment |
The spoken word version of the planet with the ZPM was Pac La Rush Ta On As At (Paclarush Taonas also means "Lost in Fire" in Ancient.)
The spoken word version of the planet with the ZPM was Pac La Rush Ta On As At (Paclarush Taonas also means "Lost in Fire" in Ancient.)
answered Feb 24 '14 at 8:12
triptrip
311
311
Welcome to this website, that's a very good first contribution! Would it not be rather "Ploc La Rush Ta On As At", judging from the name of the planet? stargate.wikia.com/wiki/Proclarush
– Eureka
Feb 24 '14 at 8:39
That's a very good contribution, but considering this is a two year old question with an accepted answer, it would be better as a comment.
– James Sheridan
Feb 24 '14 at 9:46
add a comment |
Welcome to this website, that's a very good first contribution! Would it not be rather "Ploc La Rush Ta On As At", judging from the name of the planet? stargate.wikia.com/wiki/Proclarush
– Eureka
Feb 24 '14 at 8:39
That's a very good contribution, but considering this is a two year old question with an accepted answer, it would be better as a comment.
– James Sheridan
Feb 24 '14 at 9:46
Welcome to this website, that's a very good first contribution! Would it not be rather "Ploc La Rush Ta On As At", judging from the name of the planet? stargate.wikia.com/wiki/Proclarush
– Eureka
Feb 24 '14 at 8:39
Welcome to this website, that's a very good first contribution! Would it not be rather "Ploc La Rush Ta On As At", judging from the name of the planet? stargate.wikia.com/wiki/Proclarush
– Eureka
Feb 24 '14 at 8:39
That's a very good contribution, but considering this is a two year old question with an accepted answer, it would be better as a comment.
– James Sheridan
Feb 24 '14 at 9:46
That's a very good contribution, but considering this is a two year old question with an accepted answer, it would be better as a comment.
– James Sheridan
Feb 24 '14 at 9:46
add a comment |
Also, the symbols can be spoken, remember. I recall that hell planet with the zpm that SG1 needed to power the chair on earth, that they didn't know was there, my episode knowledge is shaky. :)
2
I believe that was Proclarush.
– user1027
Apr 26 '11 at 20:39
add a comment |
Also, the symbols can be spoken, remember. I recall that hell planet with the zpm that SG1 needed to power the chair on earth, that they didn't know was there, my episode knowledge is shaky. :)
2
I believe that was Proclarush.
– user1027
Apr 26 '11 at 20:39
add a comment |
Also, the symbols can be spoken, remember. I recall that hell planet with the zpm that SG1 needed to power the chair on earth, that they didn't know was there, my episode knowledge is shaky. :)
Also, the symbols can be spoken, remember. I recall that hell planet with the zpm that SG1 needed to power the chair on earth, that they didn't know was there, my episode knowledge is shaky. :)
answered Apr 26 '11 at 20:00
Mister IT GuruMister IT Guru
1312
1312
2
I believe that was Proclarush.
– user1027
Apr 26 '11 at 20:39
add a comment |
2
I believe that was Proclarush.
– user1027
Apr 26 '11 at 20:39
2
2
I believe that was Proclarush.
– user1027
Apr 26 '11 at 20:39
I believe that was Proclarush.
– user1027
Apr 26 '11 at 20:39
add a comment |
What if the logic given in the show was erroneous?
My thoughts were that you make a line from coordinate 1 to coordinate 2. From the midpoint of 1-2, you make a line to 3, from the midpoint of that line, you make one to 4 and so on until you make a line from the point of origin to the midpoint of line x to point 6, 7 or 8. Order would count in such a system.
Or maybe Stargate coordinates are little-endian, so the gate will not activate until a full address input and has the point of origin as a parity. So the point of origin is the first point linked to another chevron's coordinate even though it is input last. Then the order of coordinates would be 100% hard-coded and no coordinate could be swapped to yield the same point in space.
Or the coordinates might be based on triangles, e.g. Triangle abc, Triangle def and point o or line go or triangle gho. Triangle abc yields a unique point by having a line between a and midpoint bc, and the midpoint of that line is connected to point b. This point is unique for each permutation of points a,b and c for Triangle abc, ergo coordinate triplet acb will not give the same point as triplet abc. The same rules apply for Triangle def. The midpoint of point abc and point def is x. The midpoint of x and o (the point of origin) is the final destination for a 7 chevron address. The midpoint of x and g is point y. The midpoint of y and o is the destination for an 8 chevron address. The Triangle xgo is used for a 9 chevron address.
Mind you all, my Stargate theory is convoluted, but it does offer an explanation for why gate addresses require a specific order of coordinates instead of just a specific set of them in any order or a specific set of pairs in any order. But in the math of the show's Stargate Theory, The pairs can be swapped and offer the same point. e.g. go forward 3 and up 2 is the same as go up 2 and go forward 3.
This directly conflicts with what we saw on-screen on numerous occasions.
– Valorum
Sep 29 '15 at 20:05
add a comment |
What if the logic given in the show was erroneous?
My thoughts were that you make a line from coordinate 1 to coordinate 2. From the midpoint of 1-2, you make a line to 3, from the midpoint of that line, you make one to 4 and so on until you make a line from the point of origin to the midpoint of line x to point 6, 7 or 8. Order would count in such a system.
Or maybe Stargate coordinates are little-endian, so the gate will not activate until a full address input and has the point of origin as a parity. So the point of origin is the first point linked to another chevron's coordinate even though it is input last. Then the order of coordinates would be 100% hard-coded and no coordinate could be swapped to yield the same point in space.
Or the coordinates might be based on triangles, e.g. Triangle abc, Triangle def and point o or line go or triangle gho. Triangle abc yields a unique point by having a line between a and midpoint bc, and the midpoint of that line is connected to point b. This point is unique for each permutation of points a,b and c for Triangle abc, ergo coordinate triplet acb will not give the same point as triplet abc. The same rules apply for Triangle def. The midpoint of point abc and point def is x. The midpoint of x and o (the point of origin) is the final destination for a 7 chevron address. The midpoint of x and g is point y. The midpoint of y and o is the destination for an 8 chevron address. The Triangle xgo is used for a 9 chevron address.
Mind you all, my Stargate theory is convoluted, but it does offer an explanation for why gate addresses require a specific order of coordinates instead of just a specific set of them in any order or a specific set of pairs in any order. But in the math of the show's Stargate Theory, The pairs can be swapped and offer the same point. e.g. go forward 3 and up 2 is the same as go up 2 and go forward 3.
This directly conflicts with what we saw on-screen on numerous occasions.
– Valorum
Sep 29 '15 at 20:05
add a comment |
What if the logic given in the show was erroneous?
My thoughts were that you make a line from coordinate 1 to coordinate 2. From the midpoint of 1-2, you make a line to 3, from the midpoint of that line, you make one to 4 and so on until you make a line from the point of origin to the midpoint of line x to point 6, 7 or 8. Order would count in such a system.
Or maybe Stargate coordinates are little-endian, so the gate will not activate until a full address input and has the point of origin as a parity. So the point of origin is the first point linked to another chevron's coordinate even though it is input last. Then the order of coordinates would be 100% hard-coded and no coordinate could be swapped to yield the same point in space.
Or the coordinates might be based on triangles, e.g. Triangle abc, Triangle def and point o or line go or triangle gho. Triangle abc yields a unique point by having a line between a and midpoint bc, and the midpoint of that line is connected to point b. This point is unique for each permutation of points a,b and c for Triangle abc, ergo coordinate triplet acb will not give the same point as triplet abc. The same rules apply for Triangle def. The midpoint of point abc and point def is x. The midpoint of x and o (the point of origin) is the final destination for a 7 chevron address. The midpoint of x and g is point y. The midpoint of y and o is the destination for an 8 chevron address. The Triangle xgo is used for a 9 chevron address.
Mind you all, my Stargate theory is convoluted, but it does offer an explanation for why gate addresses require a specific order of coordinates instead of just a specific set of them in any order or a specific set of pairs in any order. But in the math of the show's Stargate Theory, The pairs can be swapped and offer the same point. e.g. go forward 3 and up 2 is the same as go up 2 and go forward 3.
What if the logic given in the show was erroneous?
My thoughts were that you make a line from coordinate 1 to coordinate 2. From the midpoint of 1-2, you make a line to 3, from the midpoint of that line, you make one to 4 and so on until you make a line from the point of origin to the midpoint of line x to point 6, 7 or 8. Order would count in such a system.
Or maybe Stargate coordinates are little-endian, so the gate will not activate until a full address input and has the point of origin as a parity. So the point of origin is the first point linked to another chevron's coordinate even though it is input last. Then the order of coordinates would be 100% hard-coded and no coordinate could be swapped to yield the same point in space.
Or the coordinates might be based on triangles, e.g. Triangle abc, Triangle def and point o or line go or triangle gho. Triangle abc yields a unique point by having a line between a and midpoint bc, and the midpoint of that line is connected to point b. This point is unique for each permutation of points a,b and c for Triangle abc, ergo coordinate triplet acb will not give the same point as triplet abc. The same rules apply for Triangle def. The midpoint of point abc and point def is x. The midpoint of x and o (the point of origin) is the final destination for a 7 chevron address. The midpoint of x and g is point y. The midpoint of y and o is the destination for an 8 chevron address. The Triangle xgo is used for a 9 chevron address.
Mind you all, my Stargate theory is convoluted, but it does offer an explanation for why gate addresses require a specific order of coordinates instead of just a specific set of them in any order or a specific set of pairs in any order. But in the math of the show's Stargate Theory, The pairs can be swapped and offer the same point. e.g. go forward 3 and up 2 is the same as go up 2 and go forward 3.
edited Jan 11 '12 at 23:11
HorusKol
32.7k4109163
32.7k4109163
answered Jan 11 '12 at 22:49
Dzhess'eiDzhess'ei
71
71
This directly conflicts with what we saw on-screen on numerous occasions.
– Valorum
Sep 29 '15 at 20:05
add a comment |
This directly conflicts with what we saw on-screen on numerous occasions.
– Valorum
Sep 29 '15 at 20:05
This directly conflicts with what we saw on-screen on numerous occasions.
– Valorum
Sep 29 '15 at 20:05
This directly conflicts with what we saw on-screen on numerous occasions.
– Valorum
Sep 29 '15 at 20:05
add a comment |
I think about this and I think I have a answer. There are two things you have to consider:
First, the way it is explained (3 lines + one point in space) is an easier explanation of a complex problem. That means that while it is a good explanation, it is not the complete explanation.
Second, you assume that one symbol is equal with one point, or one star. It could be an area, a representation for an mathematical equation, the Stargate would know the place even if you bombed complete system out off space.
A nearer explanation:
Let's start with the last symbol: How does the gate know where it (the gate) or the symbol is? But what of the gates which get moved from planet to planet? If one symbol would represent one planet (point in space) then a two symbol address would be enough. But than the gate would have had to have a lot more symbols. So there is a different system.
It is more logical that that one symbol is programmed with under symbols/sub symbols. For example, a 7 symbol address would be an 6+1 address where the 1 would be another 6, just shortened: 6+6 address.
The original gate (Antarctic) has a different last symbol than the second (symbiot/Egypt) gate. The second gate has the "at" â symbol which is a star on its own.
So the last symbol of a gate address are 6 symbols shortened into one symbol.
The idea with pairs. That doesn't matter. If you have 3 lines and know they just meet at one point, than neither pair nor order matter because there is only one possible 'meet' if the points (dots) are connected differently than the lines won't meet. A Stargate would be smart enough to filter that out. But it is not that easy.
So let's look at different galaxies. The same symbol could represent either a "star" or a galaxy. For example, if the symbol % is at first place it's the galaxy programmed on that symbol; if it's at second place it doesn't function; if it's on 3rd place it's planet a in that system right side/left side etc. The different galaxies+ many gates in the milky way+ the possibility of "there has to be more space for places we don't know yet, there is just enough space on the gate, if it is programmed in the way that that the order matters!
Normal Computers, how do they know that that button is the letter A or a or b or buttons which have 3 to 5 functions. It is a question of programming. It could be programmed that a point in place just has one combination even if an different order would be "free" (without a Stargate). (Or that some addresses can be mixed but others can't, which I doubt. It would be more effective to do the solo address thing). The Ancient thought they are the best(or only persons) and didn't programme for fast dialling. I want to add that the ones who "built" the Stargates (one persons invented it) are not the same persons who for example later returned to earth or fought the wraith) the real gatebuilders were smarter than they later generations.
The original gates (Milky Way) are built to have many (perhaps with possibility to grow) gates addresses. That's is why there are either 9 points on the gate (or just so the gate is symmetric which is very likely). So there is way for more addresses. The Stargate Universe series is not in my Stargate world because it is idiotic and not part of it. (P.S. Doesn't that ship not look like a Wraith ship? And that gate cant be the 1st generation, just look at the planes for the first gate which looks like the milky way's).
There's in addition of how a Stargate works. It functions in the opposite like a rubber band. For a rubber band 1 metre you need 2 steps. If you stretch the band, you need 5-6 steps. The gate functions the other way around, it pushes/shrinks space together and a suction from the place you want to go to (that's why the gate just functions in one direction by the way). While in canon there's talk about de- and rematerialization, that's not what really happens, just what the think. They once thought that the Ancients are from earth (and seeded other planets which is false too) which later gets seenn as false since they came from their own galaxy. Which I would have told you without the show. Bye the way, Atlantis left earth 5000 years ago and returned 1500-1000 years ago and not millions, most likely.
So in end effect, it is the programming and the "worms" that must somehow put it so that an order of the symbols is important (even if some addresses wouldn't need more that 2(or 5) mathematically.
New contributor
4
This is quite a long and difficult read, could you edit it to be clearer and add in evidence such as quotes where possible?
– TheLethalCarrot
yesterday
add a comment |
I think about this and I think I have a answer. There are two things you have to consider:
First, the way it is explained (3 lines + one point in space) is an easier explanation of a complex problem. That means that while it is a good explanation, it is not the complete explanation.
Second, you assume that one symbol is equal with one point, or one star. It could be an area, a representation for an mathematical equation, the Stargate would know the place even if you bombed complete system out off space.
A nearer explanation:
Let's start with the last symbol: How does the gate know where it (the gate) or the symbol is? But what of the gates which get moved from planet to planet? If one symbol would represent one planet (point in space) then a two symbol address would be enough. But than the gate would have had to have a lot more symbols. So there is a different system.
It is more logical that that one symbol is programmed with under symbols/sub symbols. For example, a 7 symbol address would be an 6+1 address where the 1 would be another 6, just shortened: 6+6 address.
The original gate (Antarctic) has a different last symbol than the second (symbiot/Egypt) gate. The second gate has the "at" â symbol which is a star on its own.
So the last symbol of a gate address are 6 symbols shortened into one symbol.
The idea with pairs. That doesn't matter. If you have 3 lines and know they just meet at one point, than neither pair nor order matter because there is only one possible 'meet' if the points (dots) are connected differently than the lines won't meet. A Stargate would be smart enough to filter that out. But it is not that easy.
So let's look at different galaxies. The same symbol could represent either a "star" or a galaxy. For example, if the symbol % is at first place it's the galaxy programmed on that symbol; if it's at second place it doesn't function; if it's on 3rd place it's planet a in that system right side/left side etc. The different galaxies+ many gates in the milky way+ the possibility of "there has to be more space for places we don't know yet, there is just enough space on the gate, if it is programmed in the way that that the order matters!
Normal Computers, how do they know that that button is the letter A or a or b or buttons which have 3 to 5 functions. It is a question of programming. It could be programmed that a point in place just has one combination even if an different order would be "free" (without a Stargate). (Or that some addresses can be mixed but others can't, which I doubt. It would be more effective to do the solo address thing). The Ancient thought they are the best(or only persons) and didn't programme for fast dialling. I want to add that the ones who "built" the Stargates (one persons invented it) are not the same persons who for example later returned to earth or fought the wraith) the real gatebuilders were smarter than they later generations.
The original gates (Milky Way) are built to have many (perhaps with possibility to grow) gates addresses. That's is why there are either 9 points on the gate (or just so the gate is symmetric which is very likely). So there is way for more addresses. The Stargate Universe series is not in my Stargate world because it is idiotic and not part of it. (P.S. Doesn't that ship not look like a Wraith ship? And that gate cant be the 1st generation, just look at the planes for the first gate which looks like the milky way's).
There's in addition of how a Stargate works. It functions in the opposite like a rubber band. For a rubber band 1 metre you need 2 steps. If you stretch the band, you need 5-6 steps. The gate functions the other way around, it pushes/shrinks space together and a suction from the place you want to go to (that's why the gate just functions in one direction by the way). While in canon there's talk about de- and rematerialization, that's not what really happens, just what the think. They once thought that the Ancients are from earth (and seeded other planets which is false too) which later gets seenn as false since they came from their own galaxy. Which I would have told you without the show. Bye the way, Atlantis left earth 5000 years ago and returned 1500-1000 years ago and not millions, most likely.
So in end effect, it is the programming and the "worms" that must somehow put it so that an order of the symbols is important (even if some addresses wouldn't need more that 2(or 5) mathematically.
New contributor
4
This is quite a long and difficult read, could you edit it to be clearer and add in evidence such as quotes where possible?
– TheLethalCarrot
yesterday
add a comment |
I think about this and I think I have a answer. There are two things you have to consider:
First, the way it is explained (3 lines + one point in space) is an easier explanation of a complex problem. That means that while it is a good explanation, it is not the complete explanation.
Second, you assume that one symbol is equal with one point, or one star. It could be an area, a representation for an mathematical equation, the Stargate would know the place even if you bombed complete system out off space.
A nearer explanation:
Let's start with the last symbol: How does the gate know where it (the gate) or the symbol is? But what of the gates which get moved from planet to planet? If one symbol would represent one planet (point in space) then a two symbol address would be enough. But than the gate would have had to have a lot more symbols. So there is a different system.
It is more logical that that one symbol is programmed with under symbols/sub symbols. For example, a 7 symbol address would be an 6+1 address where the 1 would be another 6, just shortened: 6+6 address.
The original gate (Antarctic) has a different last symbol than the second (symbiot/Egypt) gate. The second gate has the "at" â symbol which is a star on its own.
So the last symbol of a gate address are 6 symbols shortened into one symbol.
The idea with pairs. That doesn't matter. If you have 3 lines and know they just meet at one point, than neither pair nor order matter because there is only one possible 'meet' if the points (dots) are connected differently than the lines won't meet. A Stargate would be smart enough to filter that out. But it is not that easy.
So let's look at different galaxies. The same symbol could represent either a "star" or a galaxy. For example, if the symbol % is at first place it's the galaxy programmed on that symbol; if it's at second place it doesn't function; if it's on 3rd place it's planet a in that system right side/left side etc. The different galaxies+ many gates in the milky way+ the possibility of "there has to be more space for places we don't know yet, there is just enough space on the gate, if it is programmed in the way that that the order matters!
Normal Computers, how do they know that that button is the letter A or a or b or buttons which have 3 to 5 functions. It is a question of programming. It could be programmed that a point in place just has one combination even if an different order would be "free" (without a Stargate). (Or that some addresses can be mixed but others can't, which I doubt. It would be more effective to do the solo address thing). The Ancient thought they are the best(or only persons) and didn't programme for fast dialling. I want to add that the ones who "built" the Stargates (one persons invented it) are not the same persons who for example later returned to earth or fought the wraith) the real gatebuilders were smarter than they later generations.
The original gates (Milky Way) are built to have many (perhaps with possibility to grow) gates addresses. That's is why there are either 9 points on the gate (or just so the gate is symmetric which is very likely). So there is way for more addresses. The Stargate Universe series is not in my Stargate world because it is idiotic and not part of it. (P.S. Doesn't that ship not look like a Wraith ship? And that gate cant be the 1st generation, just look at the planes for the first gate which looks like the milky way's).
There's in addition of how a Stargate works. It functions in the opposite like a rubber band. For a rubber band 1 metre you need 2 steps. If you stretch the band, you need 5-6 steps. The gate functions the other way around, it pushes/shrinks space together and a suction from the place you want to go to (that's why the gate just functions in one direction by the way). While in canon there's talk about de- and rematerialization, that's not what really happens, just what the think. They once thought that the Ancients are from earth (and seeded other planets which is false too) which later gets seenn as false since they came from their own galaxy. Which I would have told you without the show. Bye the way, Atlantis left earth 5000 years ago and returned 1500-1000 years ago and not millions, most likely.
So in end effect, it is the programming and the "worms" that must somehow put it so that an order of the symbols is important (even if some addresses wouldn't need more that 2(or 5) mathematically.
New contributor
I think about this and I think I have a answer. There are two things you have to consider:
First, the way it is explained (3 lines + one point in space) is an easier explanation of a complex problem. That means that while it is a good explanation, it is not the complete explanation.
Second, you assume that one symbol is equal with one point, or one star. It could be an area, a representation for an mathematical equation, the Stargate would know the place even if you bombed complete system out off space.
A nearer explanation:
Let's start with the last symbol: How does the gate know where it (the gate) or the symbol is? But what of the gates which get moved from planet to planet? If one symbol would represent one planet (point in space) then a two symbol address would be enough. But than the gate would have had to have a lot more symbols. So there is a different system.
It is more logical that that one symbol is programmed with under symbols/sub symbols. For example, a 7 symbol address would be an 6+1 address where the 1 would be another 6, just shortened: 6+6 address.
The original gate (Antarctic) has a different last symbol than the second (symbiot/Egypt) gate. The second gate has the "at" â symbol which is a star on its own.
So the last symbol of a gate address are 6 symbols shortened into one symbol.
The idea with pairs. That doesn't matter. If you have 3 lines and know they just meet at one point, than neither pair nor order matter because there is only one possible 'meet' if the points (dots) are connected differently than the lines won't meet. A Stargate would be smart enough to filter that out. But it is not that easy.
So let's look at different galaxies. The same symbol could represent either a "star" or a galaxy. For example, if the symbol % is at first place it's the galaxy programmed on that symbol; if it's at second place it doesn't function; if it's on 3rd place it's planet a in that system right side/left side etc. The different galaxies+ many gates in the milky way+ the possibility of "there has to be more space for places we don't know yet, there is just enough space on the gate, if it is programmed in the way that that the order matters!
Normal Computers, how do they know that that button is the letter A or a or b or buttons which have 3 to 5 functions. It is a question of programming. It could be programmed that a point in place just has one combination even if an different order would be "free" (without a Stargate). (Or that some addresses can be mixed but others can't, which I doubt. It would be more effective to do the solo address thing). The Ancient thought they are the best(or only persons) and didn't programme for fast dialling. I want to add that the ones who "built" the Stargates (one persons invented it) are not the same persons who for example later returned to earth or fought the wraith) the real gatebuilders were smarter than they later generations.
The original gates (Milky Way) are built to have many (perhaps with possibility to grow) gates addresses. That's is why there are either 9 points on the gate (or just so the gate is symmetric which is very likely). So there is way for more addresses. The Stargate Universe series is not in my Stargate world because it is idiotic and not part of it. (P.S. Doesn't that ship not look like a Wraith ship? And that gate cant be the 1st generation, just look at the planes for the first gate which looks like the milky way's).
There's in addition of how a Stargate works. It functions in the opposite like a rubber band. For a rubber band 1 metre you need 2 steps. If you stretch the band, you need 5-6 steps. The gate functions the other way around, it pushes/shrinks space together and a suction from the place you want to go to (that's why the gate just functions in one direction by the way). While in canon there's talk about de- and rematerialization, that's not what really happens, just what the think. They once thought that the Ancients are from earth (and seeded other planets which is false too) which later gets seenn as false since they came from their own galaxy. Which I would have told you without the show. Bye the way, Atlantis left earth 5000 years ago and returned 1500-1000 years ago and not millions, most likely.
So in end effect, it is the programming and the "worms" that must somehow put it so that an order of the symbols is important (even if some addresses wouldn't need more that 2(or 5) mathematically.
New contributor
edited 13 hours ago
Longshanks
2,27711830
2,27711830
New contributor
answered yesterday
user112240user112240
1
1
New contributor
New contributor
4
This is quite a long and difficult read, could you edit it to be clearer and add in evidence such as quotes where possible?
– TheLethalCarrot
yesterday
add a comment |
4
This is quite a long and difficult read, could you edit it to be clearer and add in evidence such as quotes where possible?
– TheLethalCarrot
yesterday
4
4
This is quite a long and difficult read, could you edit it to be clearer and add in evidence such as quotes where possible?
– TheLethalCarrot
yesterday
This is quite a long and difficult read, could you edit it to be clearer and add in evidence such as quotes where possible?
– TheLethalCarrot
yesterday
add a comment |
Thanks for contributing an answer to Science Fiction & Fantasy Stack Exchange!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fscifi.stackexchange.com%2fquestions%2f2432%2fdoes-the-order-of-glyphs-matter-in-stargate-addresses%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
7
To an alien looking at a rotary phone or, even better, a keypad, with no knowledge of Arabic numerals or the technical details of how a phone works, the order of symbol activation would appear to be arbitrary - but 555-4245 would get you a different person than 555-5424
– HorusKol
Jan 11 '12 at 23:17
How are these answers affected when you consider 8 or 9 symbol addresses, from later seasons & SGU?
– Adeptus
Jul 25 '16 at 7:03
@HorusKol: Not a good analogy, as neither a rotary phone nor a keypad give any feedback about the previously entered numbers. The DHD, however, highlights the symbols that have already been dialed, without indicating the order in which they have been dialed.
– O. R. Mapper
yesterday
@O.R.Mapper most keypad phones have had at least an LCD to provide feedback for at least 20 years now... but I think the analogy stands - you have a collection of symbols which "connect" if you complete an arbitrary symbol sequence. The only thing that seems to differ is the DHD requires an a specific origin symbol to complete the sequence. There's no guarantee that the same symbols in a different sequence (even with the same origin symbol at the end) will get you the same connections - in fact, it's practically guaranteed you won't with phones.
– HorusKol
yesterday
@HorusKol: "an LCD to provide feedback" - by showing the entered numbers in the order they were entered. Totally different case, thus. You press a key with a symbol on it, that symbol appears on the right of what is already shown in the LCD display. It's easy to see (also for an alien) that this is not arbitrary.
– O. R. Mapper
yesterday